DownloadCenter

Download Center

The files below contain the dielines and instructions required for designing a layout for the Lamàs. The dieline provided in .EPS format can placed in any graphic design program such as Illustrator, InDesign, etc. We recommend you put this in a separate layer on top and lock it. The design can be made in a separate layer below. Be sure to provide bleeds beyond the edge!

Maxi (.zip)

Template (Dielines+Instructions) for Maxi Lama - 600mm x 1900mm.

Grand (.zip)

Template (Dielines+Instructions) for Big (Grand) Lama - 500mm x 1541mm.

Medium (.zip)

Template (Dielines+Instructions) for Medium Lama - 420mm x 1381mm.

Small_Petit_Plus (.zip)

Template (Dielines+Instructions) for Small Plus (Petit Plus) Lama - 280mm x 952mm.

Small_Petit (.zip)

Template (Dielines+Instructions) for Small (Petit) Lama - 280mm x 761mm.

Mini_Plus (.zip)

Template (Dielines+Instructions) for Mini Plus Lama - 180mm x 536mm.

Mini (.zip)

Template (Dielines+Instructions) for Mini Lama - 180mm x 400mm.

Mikro_Square (.zip)

Template (Dielines+Instructions) for Mikro Square Lama - 120mm x 250mm.

Specialty Lamàs

Grand_Bin (.zip)

stacks_image_AE75CA15-45F3-4D9D-9AFE-1B49424101A3

Template (Dielines+Instructions) for Grand Bin Lama - 500mm x 1541mm high Column, with a bin of about 600mm height and holding area of about 400mm x 400mm square.

Maxi_Table (.zip)

stacks_image_67D1266A-2A2B-4F29-9A34-29657736EC3F

Template (Dielines+Instructions) for Maxi Table Lama - a 990mm (3.25 ft) high table, with a table top of about 300mm x 500mm.

Maxi_Tablama (.zip)

stacks_image_8DDB7353-BE2F-4E49-9AB0-B38C75F011F8

Template (Dielines+Instructions) for Maxi TabLama - 600mm x 2100mm Column with a cut-out with table-top in between of about 600mm high x 400mm wide. Ideal for a person to show off samples.

Pragati Offset Pvt. Ltd.
(Exclusive Licensee of Lamà Display Systems)
17, Red Hills, Hyderabad - 500004
Andhra Pradesh, India
Tel: +91-40-2338 0000
Fax: +91-40-2339 0230

Pragati runs
SAP R/3 ERP